Auto Chart User Group
Would you like to react to this message? Create an account in a few clicks or log in to continue.

1159 di question

2 posters

Go down

1159 di question Empty 1159 di question

Post by short grub Wed Mar 02, 2016 1:03 pm

will autochart pro work with my 1159 networked with 1198 si? it will  be installed on the 98 but will the new map also work on the 59 or do I need two autochart pro cards

as always thank you all

( if this is in the wrong area please move )
short grub
short grub

Posts : 3
Join date : 2016-03-02
Location : central illinois

Back to top Go down

1159 di question Empty Re: 1159 di question

Post by CamoHunter Wed Mar 02, 2016 2:17 pm

Need two map cards. Just like you would need two lakemaster cards, or two navionics cards if you were using those.

Map cards are not shared over the network.

CamoHunter

Posts : 79
Join date : 2015-01-21

Back to top Go down

1159 di question Empty Re: 1159 di question

Post by short grub Wed Mar 02, 2016 2:22 pm

thank you camohunter

I understand now I will need two zero line cards one for each unit

another question if I may will ac pro collect data from my 360 unit /
short grub
short grub

Posts : 3
Join date : 2016-03-02
Location : central illinois

Back to top Go down

1159 di question Empty Re: 1159 di question

Post by CamoHunter Mon Mar 07, 2016 11:42 am

The only thing autochart uses SI imaging for is the side imaging mosaic, if you choose to create this.

Otherwise, depth data for a contour map, is always collected with 200khz sonar. If you have multiple transducers networked to your depthfinder (trolling motor, transom), you can select which transducer you use.

For most all circumstances, you want the depth to be collected at the transom transducer, with a gps receiver positioned close to it. That way you are collecting data anytime your driving the boat around with the big motor.

Now, you asked about 360. I believe your depthfinder saves 360 imaging in the sonar recording, just as it would side imaging. And I also believe autochart displays 360 imaging in the SI mosaic, just as it would side imaging.
However, without actually owning a 360 transducer, I don't have the ability to test it out on my end.

If you make a few small sonar recordings with your depthfinder connected to your 36o transducer, maybe I could have you upload them to a drive, and I could play around with them in autochart.

CamoHunter

Posts : 79
Join date : 2015-01-21

Back to top Go down

1159 di question Empty Re: 1159 di question

Post by short grub Thu Mar 10, 2016 11:40 am

Camohunter I thank you very much for your help

and when I get a chance to get out and use this new mapping feature I will collect the data for you

again thank you very much for all that you do to help us all Very Happy
short grub
short grub

Posts : 3
Join date : 2016-03-02
Location : central illinois

Back to top Go down

1159 di question Empty Re: 1159 di question

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum