Settings (tilt, etc)

View previous topic View next topic Go down

Settings (tilt, etc)

Post by EricM on Wed Aug 27, 2014 7:24 pm

I am running the standard Auto Chart program and an H-bird 1199.

Under settings in the computer program, are the X, Y, Tilt, and Latency settings only measurable and adjustable in Live Data mode (requiring Onix), or will adjusting them (and checking the "use" button) make adjustments to the map generated on my computer and then transferring to the 1199? Thanks, Eric
avatar
EricM

Posts : 7
Join date : 2014-08-18
Location : Cleveland, TN

Back to top Go down

Re: Settings (tilt, etc)

Post by EricM on Thu Aug 28, 2014 12:50 am

I have since played a bunch with the parameters and it does indeed appear that adjusting them and then re-creating the map makes differences in the quality of the map. On my rig, setting the x and y offsets, although the gps receiver and the sonar transducer were only 30" apart, made the map sharper. My transducer must have been close to level, since changing it to 5 degrees was the best image.
avatar
EricM

Posts : 7
Join date : 2014-08-18
Location : Cleveland, TN

Back to top Go down

Re: Settings (tilt, etc)

Post by DougV on Sun Aug 31, 2014 12:35 pm

Thanks for sharing!
avatar
DougV
Admin

Posts : 26
Join date : 2014-07-23
Age : 49
Location : Higginsville, Missouri

http://www.dougvahrenberg.com

Back to top Go down

Re: Settings (tilt, etc)

Post by Sponsored content


Sponsored content


Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum